TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is a 6 week welding course hosted in Plympton, MA

Runs Thursday Evenings starting March 24, 2022 until April 28, 2022

Thursday Evenings 3/24, 3/31, 4/7, 4/14, 4/21, 4/28

6 p.m. - 9 p.m. every Thursday

Cost: $550, includes materials and PPE

Woman And Machine is holding an introductory 6 week welding program on Thursday nights starting March 24 from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 4 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Spring2022-Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*For this program I do highly suggest that you purchase your own hood and gloves. Lincoln offers Woman And Machine students 20% off all PPE

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is a 6 week welding course hosted in Plympton, MA

Runs Thursday Evenings starting March 24, 2022 until April 28, 2022

Thursday Evenings 3/24, 3/31, 4/7, 4/14, 4/21, 4/28

6 p.m. - 9 p.m. every Thursday

Cost: $550, includes materials and PPE

Woman And Machine is holding an introductory 6 week welding program on Thursday nights starting March 24 from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 4 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Spring2022-Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*For this program I do highly suggest that you purchase your own hood and gloves. Lincoln offers Woman And Machine students 20% off all PPE

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is a 6 week welding course hosted in Plympton, MA

Runs Thursday Evenings starting March 24, 2022 until April 28, 2022

Thursday Evenings 3/24, 3/31, 4/7, 4/14, 4/21, 4/28

6 p.m. - 9 p.m. every Thursday

Cost: $550, includes materials and PPE

Woman And Machine is holding an introductory 6 week welding program on Thursday nights starting March 24 from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 4 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Spring2022-Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*For this program I do highly suggest that you purchase your own hood and gloves. Lincoln offers Woman And Machine students 20% off all PPE

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is a 6 week welding course hosted in Plympton, MA

Runs Thursday Evenings starting March 24, 2022 until April 28, 2022

Thursday Evenings 3/24, 3/31, 4/7, 4/14, 4/21, 4/28

6 p.m. - 9 p.m. every Thursday

Cost: $550, includes materials and PPE

Woman And Machine is holding an introductory 6 week welding program on Thursday nights starting March 24 from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 4 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Spring2022-Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*For this program I do highly suggest that you purchase your own hood and gloves. Lincoln offers Woman And Machine students 20% off all PPE

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is a 6 week welding course hosted in Plympton, MA

Runs Thursday Evenings starting March 24, 2022 until April 28, 2022

Thursday Evenings 3/24, 3/31, 4/7, 4/14, 4/21, 4/28

6 p.m. - 9 p.m. every Thursday

Cost: $550, includes materials and PPE

Woman And Machine is holding an introductory 6 week welding program on Thursday nights starting March 24 from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 4 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Spring2022-Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*For this program I do highly suggest that you purchase your own hood and gloves. Lincoln offers Woman And Machine students 20% off all PPE

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is a 6 week welding course hosted in Plympton, MA

Runs Thursday Evenings starting March 24, 2022 until April 28, 2022

Thursday Evenings 3/24, 3/31, 4/7, 4/14, 4/21, 4/28

6 p.m. - 9 p.m. every Thursday

Cost: $550, includes materials and PPE

Woman And Machine is holding an introductory 6 week welding program on Thursday nights starting March 24 from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 4 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Spring2022-Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*For this program I do highly suggest that you purchase your own hood and gloves. Lincoln offers Woman And Machine students 20% off all PPE

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This class is a metal art class located in Plympton, Massachusetts:

Saturday, February 5th from 9 a.m. - 2 p.m./3 p.m.

*Cost: $150 or $175, includes materials and PPE

*cost difference is based on whether you would like to make 3 flowers ($150) or a rose and 2 additional flowers ($175). Making the rose is time intensive and a little more involved in making than some of the other flower options which is the cost difference. You may also be at the workshop for an additional hour if you decide to make a rose

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create the metal flowers.

Flower options:

Daisy

Carnation

Cosmos

Poppy

Tulip

Lily

Foliage

*Rose (must pick $175 class option)

What You Will Learn:

Safety for working with metal/welders/metalworking tools

-Hand Grinders/Belt Sander

-Porta Band Saw

-Plasma cutter

-Vice

-Hand Torch

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

This is a longer class but the pieces are pre-selected for you to create.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is an introductory welding class hosted in Plympton, MA

January 16, 2022

9 a.m. - 1 p.m.

Cost: $175, includes materials and PPE

Woman And Machine is holding an ‘Intro to MIG Welding' welding class on Sunday morning, January 16, 2022 from 9 a.m. - 1 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 6 students. This is a Co-Ed Class so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the event is sold out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.

*to sign up for the waitlist email info@womanandmachine.org with subject line - Intro to MIG Class 1/16/2022 Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the evening with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc. Come ready to learn and 'get sparky'!

What You Will Learn:

Safety for welders

Basics of the weld machine and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This class is a metal art class located in Plympton, Massachusetts:

Friday evening, December 14th from 6 - 9 p.m.

Cost: $75, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create the metal roses.

What You Will Learn:

Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Grinder with cut off wheel

-Wire wheels

-Plasma cutter

-Hammers, chisels, punches, dollies, files

-Vice

-Hand Torch

-MIG Welders

How to prep metal

Design and fabrication of art pieces

Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*Please bring a mask to wear when in class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is an introductory welding class hosted in Plympton, MA

December 29, 2021

6 p.m. - 10 p.m.

Cost: $175, includes materials and PPE

Woman And Machine is holding an ‘Intro to MIG Welding' welding class on Wednesday night, December 29, 2021 from 6 p.m - 10 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 6 students. This is a Co-Ed Class so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the event is sold out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.

*to sign up for the waitlist email info@womanandmachine.org with subject line - Intro to MIG Class 12/29/2021 Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the evening with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc. Come ready to learn and 'get sparky'!

What You Will Learn:

Safety for welders

Basics of the weld machine and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This class is a metal art class located in Plympton, Massachusetts:

Monday evening, December 20 from 6 - 9 p.m.

Cost: $125, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create the metal reindeer. The reindeer are approximately 16” tall and 10” long.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Hand Grinders/Belt Sander

-Porta Band Saw

-Vice

-Hand Torch

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class! *Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is a metal art class hosted in Plympton, MA

December 16, 2021

6 p.m. - 9 p.m.

Cost: $150, includes materials and PPE

This is a 3 hour metal art course that leads you through how to make a metal snowman out of found objects. Participants will be exposed to numerous metal working tools such as a belt sander, hand grinder, and welder.

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be able to run 24 hours prior. An option will be given to move to another art class scheduled later in the year or a refund can be issued.

For class we will be reviewing various metal working fundamentals to create the snowman.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Belt Sander

-Hand Grinder

-Wire Wheels

-Vice

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop). If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is an introduction to plasma cutting class hosted in Plympton, MA

December 10, 2021

6 p.m. - 9 p.m.

Cost: $100, includes materials and PPE

This is an introduction to hand plasma cutting course that leads you through how to make a metal luminary with a plasma cutter. Participants will be exposed to the plasma cutter more in-depth and work on refining their skills with cutting out patterns into their luminaries.

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be able to run 24 hours prior. An option will be given to move to another art class scheduled later in the year or a refund can be issued.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Wire wheels

-Plasma Cutter

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is a metal art class hosted in Plympton, MA

October 14 2021

6 p.m. - 9 p.m.

Cost: $75, includes materials and PPE

This is a 3 hour metal art course that leads you through how to make a metal pumpkin out of found objects. Participants will be exposed to numerous metal working tools such as a bench grinder and welder.

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be able to run 24 hours prior. An option will be given to move to another art class scheduled later in the year or a refund can be issued.

For class we will be reviewing various metal working fundamentals to create the pumpkin.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Grinder with cut off wheel

-Wire wheels

-Hammers, chisels, punches, dollies, files

-Vice

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is a metal art class hosted in Plympton, MA

September 9 2021

6 p.m. - 9 p.m.

Cost: $150, includes materials and PPE

This is a 3 hour metal art course that leads you through how to make a metal owl out of found objects. Participants will be exposed to numerous metal working tools such as a bench grinder and welder.

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be able to run 24 hours prior. An option will be given to move to another art class scheduled later in the year or a refund can be issued.

For class we will be reviewing various metal working fundamentals to create the owl.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Grinder with cut off wheel

-Wire wheels

-Hammers, chisels, punches, dollies, files

-Vice

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

August 29, 2021

9 a.m. - 1 p.m.

Cost: $175, includes materials and PPE

Woman And Machine is holding an ‘Intro to MIG Welding' welding class on Sunday, August 29, 2021 from 9 a.m. - 1 p.m. at Karen Sullivan’s home shop in Plympton with guest instructor Julie Hemingway of TradeBabes.

To give our participants the most amount of rod time, we can accept a maximum of 8 students. This is a LADIES ONLY class so we are accepting women only. Guys keep an eye out for our other Intro Classes!

There will be a wait-list so if the event is sold out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.

*to sign up for the waitlist email info@womanandmachine.org with subject line - Ladies Only - Intro to MIG Class 8/29/2021 Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the day. Come ready to learn and 'get sparky'!

What You Will Learn:

Safety for welders

Basics of the weld machine and various components of the welder

How to properly set-up a welder

Welding steel in the Flat

Proper techniques for welding "tee", "lap", "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, and hood) but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Highly suggest bringing a water bottle or a drink to stay hydrated. I will have water available. Feel free to bring snacks as well.

Questions? Email: info@womanandmachine.org

Photo courtesy of: BLM Photography (https://www.blmphoto.com/)

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is a metal art class hosted in Plympton, MA

August 28, 2021

9 a.m. - 3 p.m. (1 hr lunch break)

Cost: $225, includes materials and PPE

This is a longer class than some of the other metal art pieces that are done at Woman And Machine. This class will be more in-depth where the piece is more complex and the class is set for 5 hours with a 1 hour break.

Come and make a heron planter, it stands 2’ tall and the bowl piece measures 6” around.

I will be able to take 4 students, with a minimum of 2 necessary to run the class. I will be in contact to let you know if the class will be able to run 24 hours prior. An option will be given to move to another art class scheduled later in the year or a refund can be issued.

For class we will be reviewing various metal working fundamentals to create the heron planter.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Grinder with cut off wheel

-Wire wheels

-Hammers, chisels, punches, dollies, files

-Vice

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This class is a metal art class located in Plympton, Massachusetts:

Wednesday evening, July 28th from 6 - 9 p.m.

Cost: $100, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create the metal butterflies. Finished student Butterflies will range in size (the student chooses how their butterfly will look). For reference the class model piece is 11” long.

What You Will Learn:

Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Bench Grinder

-Wire wheels

-Plasma cutter

-Hammers, chisels, punches, dollies, files

-Vice

-MIG Welders

How to prep metal

Design and fabrication of art pieces

Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*Please bring a mask to wear when in class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This class is a metal art class located in Plympton, Massachusetts:

Tuesday evening, July 13th from 6 - 9 p.m. (give or take a half hour)

Cost: $100, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create a metal dragonfly. Finished student dragonflies will range in size (the student chooses how their dragonfly will look). For reference the class model piece is 7.5” long from head to tail. The student can choose to keep their dragonfly free as in the picture or it can be put on a stake to put in the ground.

What You Will Learn:

Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Bench Grinder

-Wire wheels

-Plasma cutter

-Hammers, chisels, punches, dollies, files

-Vice

-MIG Welders

How to prep metal

Design and fabrication of art pieces

Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This is an introductory welding class hosted in Plympton, MA

June 23, 2021

6 p.m. - 10 p.m.

**Cost: $175, includes materials and PPE

Woman And Machine is holding an ‘Intro to MIG Welding' welding class on Wednesday night, June 23, 2021 from 6 p.m - 10 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 6 students. This is a Co-Ed Class so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the event is sold out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.

*to sign up for the waitlist email info@womanandmachine.org with subject line - Intro to MIG Class 6/23/2021 Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the evening with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc. Come ready to learn and 'get sparky'!

What You Will Learn:

Safety for welders

Basics of the weld machine and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*Please bring a mask to wear when we can not social distance in the garage.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

**Due to changes in steel pricing, I am now offering this class at the original Intro to MIG Welding price and my normal 8 hour Intro to Welding Class will be at a higher rate. The 8 hour class will review more items and also allow you to make a project at the end - this class is an intro class so you can see how welding works and start some basic practice and a few types of joint.

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This class is a metal art class located in Plympton, Massachusetts:

Wednesday evening, June 16th from 6 - 9 p.m.

Cost: $100, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create a metal flower. Finished student flowers will range in size (the student chooses how their flower will look but will still be utilizing horshoes for the petals - reference class pictures to see example).

What You Will Learn:

Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Bench Grinder

-Wire wheels

-Hammers, chisels, punches, dollies, files

-Vice

-MIG Welders

How to prep metal

Design and fabrication of art pieces

Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*Please bring a mask to wear when in class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This class is an introductory weld course located in Plympton, Massachusetts:

Saturday, June, 12, 2021 from 9 a.m. - 6 p.m.

Cost: $175, includes materials and PPEJune 12, 2021

Woman And Machine is holding an ‘Intro to MIG Welding' welding class on Saturday, June 12, 2021 from 9 a.m. - 6 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of rod time, we can accept a maximum of 6 students. This is a LADIES ONLY class so we are accepting women only.

There will be a wait-list so if the event is sold out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.

*to sign up for the waitlist email info@womanandmachine.org with subject line - Ladies Only - Intro to MIG Class 6/12/2021 Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the day. Come ready to learn and 'get sparky'!

What You Will Learn:

Safety for welders

Basics of the weld machine and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, and Overhead positions

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

There may also be the opportunity to weld exhaust

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*Please bring a mask to wear when we can not social distance in the garage.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Highly suggest bringing a water bottle. We will be breaking for lunch for 1 hour. Feel free to bring your lunch or there is a local convenience store down the way to get lunch as well as a pizza place to order from. Also feel free to bring snacks as well.

Questions? Email: info@womanandmachine.org

Photo courtesy of: BLM Photography (https://www.blmphoto.com/)

TO SIGN UP PLEASE GO TO OUR LISTINGS FOR CLASSES FOUND HERE

This class is a metal art class located in Plympton, Massachusetts:

Friday evening, June 11th from 6 - 9 p.m.

Cost: $100, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create a metal dragonfly. Finished student dragonflies will range in size (the student chooses how their dragonfly will look). For reference the class model piece is 7.5” long from head to tail. The student can choose to keep their dragonfly free as in the picture or it can be put on a stake to put in the ground.

What You Will Learn:

Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Bench Grinder

-Wire wheels

-Plasma cutter

-Hammers, chisels, punches, dollies, files

-Vice

-MIG Welders

How to prep metal

Design and fabrication of art pieces

Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*Please bring a mask to wear when in class.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org